Description

Infinity Tools 1/2″ Shank 3-Pc. Cabinetmaker’s Combo Router Bit Set w/ Backcutter

Premium Factory Matched Door Making Router Bit Sets w/ Backcutter!

Infinity Tools factory matched Raised Panel and Rail & Stile router bits are perfect for making beautiful door panels and frames in 3/4″ to 1″ thick stock. Produced using the most premium raw materials and manufactured on state-of-the-art C.N.C. machinery, our Rail & Stile and Raised Panel router bits represent the finest quality on the market. The extra-sharp carbide profiles are precision ground on computer controlled equipment to ensure a perfect fit and leave the smoothest finish possible with minimal sanding. Three wing slot cutters and engineered shear cutting geometry are a big improvement over inferior quality sets that burn and tear your material.

The factory matched Rail & Stile router bit set on this page leaves an attractive 7/16″ wide profile while cutting a full 1/4″ thick tongue and groove joint to accept your raised panel. Using 1/4″ plywood for your panel? You know it’s not going to be a full 1/4″ thick, right? No problem, click here for our Plywood Panel Conversion Kits. These two piece slot cutter kits replace the 1/4″ slot cutters in the Stile and Rail profiles and give you a perfect fitting panel door when using undersized plywood panel stock.

Features include:

• 1-3/8″ wide Raised Panel profile with backcutter designed for 3/4″ to 1″ thick stock
• 7/16″ wide Rail & Stile profile designed for 3/4″ to 7/8″ thick stock
• Includes FREE ($9.90 value) Rail & Stile setup block
• Includes custom wood storage case
• Extra thick micro grain carbide edges last longer and stay sharper than inferior cutters
• Specially designed cutting geometry allow our bits to cut cleaner and require little (if any) sanding

Included in Set 00-200:

#90-507 – 1/2″ shank, Ogee Raised Panel Bit w/ Backcutter – 3-1/2″ Dia., 1-3/8″ Width

#91-501 – 1/2″ shank, 2 pc. Ogee Matched Rail & Stile Set – 1-3/4″ Dia., 7/16″ Width

Included in Set 00-201:

#90-508 – 1/2″ shank, Stnd. Raised Panel Bit w/ Backcutter – 3-1/2″ Dia., 1-3/8″ Width

#91-502 – 1/2″ shank, 2 pc. Stnd Matched Rail & Stile Set – 1-3/4″ Dia., 7/16″ Width

Included in Set 00-202:

#90-509 – 1/2″ shank, Cove Raised Panel Bit w/ Backcutter – 3-1/2″ Dia., 1-3/8″ Width

#91-502 – 1/2″ shank, 2 pc. Stnd Matched Rail & Stile Set – 1-3/4″ Dia., 7/16″ Width